棧道護欄廠家直銷 興寧人行道欄桿 河流兩側防護欄

　在橋梁護欄上噴涂粉末時，請注意吊具的導電性，吊具上的涂層不應太厚。如果太厚，可以通過集中焚燒去除設備上的涂層;因?yàn)楣ぜ苤兀员仨氝M(jìn)行設計。

When spraying powder on the bridge guardrail, please pay attention to the conductivity of the spreader, the coating on the spreader should not be too thick. If it is too thick, the coating on the equipment can be removed by centralized incineration; because the work piece is heavy, it must be designed.

　預烘烤的目的是去除工件上殘留的水分，其次是確保將一定厚度的粉末涂料更好地附著在工件表面，第三步是確保均勻地加熱工件盡快加快固化過程（歡迎免費注冊，登陸中國瀝青網（瀝青在線）行業門戶網址connoreschrich.com，免費發布供求，免費發布產品，免費發布企業動態）。一般預烘烤溫度為80-140℃。

The aim of pre-baking is to remove the residual moisture on the workpiece, then to ensure that a certain thickness of powder coating better adhere to the surface of the workpiece, the third step is to ensure that the uniform heating of the workpiece as soon as possible to speed up the curing process. The pre-baking temperature is 80-140 °C.

 　對于橋梁護欄產品，根據其特點，采用自動噴槍和手動噴槍輔助噴涂相結合的方法，目的是實時監控噴涂粉的質量，確保產品質量的穩定。通常，純多酚粉末涂料的固化條件為200℃，10min，并通過調節加熱爐的溫度和鏈速來保證固化溫度和時間。

According to the characteristics of the bridge guardrail, the method of combining automatic spray gun with manual spray gun is adopted to monitor the quality of the powder in real time and ensure the stability of the product quality. In general, the curing condition of pure polyphenol powder coating is 200 ° C, 10 min, and the curing temperature and time are ensured by adjusting the temperature of heating furnace and chain speed.

橋梁護欄粉末噴涂用冷空氣干燥。在干燥過程中，檢查工件。對于下垂，起泡，打底和打孔等允許的缺陷，可用丙酮等稀釋粉末涂料。對缺陷表面進行處理或噴涂，利用余熱固化需要修復的主要缺陷。根據涂膜的厚度選擇不同的處理方法。通常，有直接加載和重新噴涂，機械拋光以及用脫模劑處理的三種方法。

.關于價格:由于種類繁多，價格需要按規格計算，網上報價僅供參考。請勿靜默下單。如有任何問題請聯系我司客服。